I’m a fan of adhesive removers because they can make appliances changes easy and more comfortable.
Today, I’ll be taking an in-depth look at the Hollister Adapt Adhesive Remover Spray.
Disclosure: The spray used for this review was purchased through my online ostomy product supplier.
Table of Contents
About the Hollister Adapt Adhesive Remover Spray
Product name: Adapt Medical Adhesive Remover
Manufacturer: Hollister
Product #: 7737
Dimensions: 50 ml aerosol
Quantity per box: 1
Hollister not only has a strong ostomy appliance lineup, but they also make various supplies and accessories ranging from pouch deodorants (some good, some bad), barrier wipes, stoma powder; and of course, adhesive remover.
Adhesive remover sprays tend to all look very similar both in shape and capacity.
The Adapt adhesive remover comes in a metal can with a large, plastic spray nozzle. The nozzle is covered by a cap that’s secure and easy to remove.
The capacity is 50ml, which is important if you plan to bring one along in your carry-on luggage when flying. The small size also makes it easy to grip and handle.
While not all adhesive remover sprays can boast this feature, this product can be used at any angle, which could prove to be helpful when you’re trying to unstick something that might be in an awkward place.
Unlike the Eakin Release Spray, this product doesn’t come in any special scents or ingredients to sooth your skin.
Hollister has confirmed that this spray, as well as their adhesive remover wipes, are free of animal ingredients.
Using this product
Spray adhesive removers work great for removing wafers, medical tape, or other dressings that stick to your skin.
If I’m removing my appliance, I find that peeling the top edge of my wafer allows me to spray the adhesive remover so it can get under the appliance more easily.
As I continue to peel, I may continue to use more of the spray, but it is easy to apply too much if you aren’t careful.
The same technique can be used to remove medical tape as well, which I find seems to always leave a sticky mess unless I’m using an adhesive remover.
Alternatively, if I only need to remove adhesive residue, which happens a lot with certain barrier rings, I’ll apply a bit of the spray to gauze and then use that to wipe the residue off.
Does it work?
Yes, it works rather well!
Not that I’m surprised since nearly every spray adhesive remover has worked perfectly.
The spray actuator is easy to press and delivers a stream that is fairly narrow and easy to control; I’d estimate the stream to be approx. 15-20 degrees wide.
You can’t really adjust the flow rate of the spray, so it may spray too in some cases. Personally, I like to press the spray nozzle in short bursts for better control.
The spray itself has an odor to it that reminds me of weak nail polish. I do find it slightly stronger smelling than other similar sprays, so keep that in mind if you are sensitive to that kind of thing.
Once it’s on your skin, it quickly evaporates and leaves no lasting residue, however, I still clean the area around my stoma after using it.
Conclusion
At the time of this writing (Jan 2022), the Hollister Adapt Adhesive Remover spray can be purchased for around CDN$23, which has come down over the years as it used to be much higher than other adhesive remover sprays like the Coloplast Brava or Niltac spray.
Most insurance companies will cover the cost of adhesive removers.
Pros:
- Works well to loosen adhesives.
- Easy to use.
- 50ml capacity is TSA friendly for carry-on luggage.
- The lid is secure and won’t come off accidentally.
- Non-stick formula.
- Does not leave any residue.
- Multi-use spray can last over a month depending on the frequency of use.
- No animal ingredients.
- Should be easily available anywhere that carries Hollister supplies.
Cons:
- You can’t tell when the can is nearing empty.
- Far more expensive than similar products (at least here in Canada).
- Some people may find it sprays too much, and you can’t easily regulate the flow.
- Has a stronger smell compared to similar sprays.
Recommended, but…
Nearly all adhesive remover sprays work well, including this one.
There are no outstanding or unique features that set this product apart from all the other brands, so it ultimately comes down to cost and availability.
If you can find another adhesive remover spray that’s cheaper, go for that one. If all prices are equal, or if your insurance company covers the cost of your supplies, then any (including this one) will work fine.
Not everyone will need an adhesive remover, but many people will find it an invaluable part of their routine that makes appliance changes easier and with less pain!
For more information, or to request samples, please visit: www.hollister.com.
Question: Have you used this adhesive remover spray? How did it work for you?
Bonjour,
A ma sortie de l’Hospital j’ai reçu un échantillon spray adhésif Hollister j’en suis ravie et je le trouve très efficace en deux pulvérisations ! c’est clair nette et pas besoin de tirailler sur la peau. De plus il ne gêne pas du tout à la tenue du nouveau socle ! Chez nous en Charente maritime ; c’est un accessoire de confort ; il n’est donc pas remboursé par la sécurité sociale. Cela coûte 12,60 euros ! celui que j’utilise depuis le 04 avril de cette année n’est toujours pas fini et il m’en reste encore pour un petit moment !
Translated by admin:
“Hello,
When I left the Hospital I received a sample adhesive spray Hollister I am delighted and I find it very effective in two sprays! it’s clear and no need to tug on the skin. In addition, it does not interfere at all with the holding of the new base! At home in Charente Maritime; it is a comfort accessory; he is therefore not reimbursed by social security. It costs 12.60 euros! the one I use since April 04 this year is still not finished and I still have some for a little while!"
Wow Thanks again Eric . Just watched a few of your videos on the mini guide . Now I wonder if I’ve been doing extra steps that are not needed by doing what little they did teach me in the hospital . I have been using powder and Hollister skin protectant wipes and remover wipes since surgery in 2016 . I may have to try the barrier (wafer) buy itself and see what happens . Will be gone for a few days but will try that and I will let you know .Hey Lad (John) Thanks for the reminder I need to get the rubbish bins to the street for the rubbish man ! Lol .
Good luck, Robert! I love staring from the basics rather than using everything available! I hope you’re able to get good results and probably save you time with each appliance change.
Hi Robert, the remover is simply a spray or wipe which helps to loosen the adhesive of the flange/wafer. As Eric says its not an necessity but say ye have broken skin it can help make the removal easier. Here I should have said “Can" LOL. We do have some difference in meanings, you guys take the trash and put it in the trash can, we put the rubbish in the bin.
Good Morning everybody and thank you for the info . I think I may have confused myself on what we are talking about with adhesive removers . Do you all use an actual adhesive ? I guess where I may be confused is that I don’t use an actual adhesive but I do use a skin protectant that’s what I try to remove with the wipes . Is the skin protectant I’m using (Hollister skin protector wipes) the same as you all are referring to as adhesive ? I do have spray on medical adhesive but only use that if barrier starts to come loose around edges .Hey Lad ( John) . A tin ? Think I know what ye mean though . You crack me up ! I know what ye are saying about the band aid leaving the stuff behind . Electrical tape band aids leave it too . Ha . Ok it won’t work on the bald thing . But how about dish water blonde hair (gray) will it change it ? Lol
Hey Robert,
Sounds like we’ve got three different things being mentioned here:
– Adhesive: this is something that most wafers already have on them and most ostomates would not need to add extra adhesive to it. But… there are adhesive sprays and wipes to help the wafer stick better.
– Adhesive remover: Either in wipes or sprays, these products weaken the adhesives on your wafer so that it can come off easier and more cleanly (no residue left on your skin).
– Skin protectant (also called barrier wipes or sprays) are sometimes used to protect the skin from irritation. Not necessary and may interfere with the adhesives on extended wear products.
I actually go into detail about these three products in my Ostomy supplies series: https://www.veganostomy.ca/tag/ostomy-mini-guide/
I have use the adhesive spray from Hollister for a couple of years and I am very pleased with it
Hey Jim,
Hollister offers both an adhesive spray and an adhesive remover spray. Which have you used with success?