Barrier rings can help to prevent ostomy leaks, but most barrier rings get gooey and melt. Brava Protective Rings are Coloplast’s solution to this problem. But do they work?
Table of Contents
Video Review
About Brava Protective Rings
The products listed below were used for this review. Other sizes are available.
Product name: Brava Protective Ring
Manufacturer: Coloplast
Product #: 12037
Dimensions: 27mm stoma size, 2.5mm thick.
Quantity per package: 10, single-use
Product name: Brava Protective Ring
Manufacturer: Coloplast
Product #: 12047
Dimensions: 27mm stoma, 4.2mm thick.
Quantity per package: 10, single-use
Part of the Brava line by Coloplast, these Protective Rings offer another option to prevent ostomy leaks and to get a better fitting appliance.
Info In the UK, this product is called “Brava Protective Seals”, not Rings.
Interestingly enough, Coloplast already offers a moldable ring product, but it seems that the Protective Ring will be replacing them eventually.
The advantage of using the Brava Protective Ring over the Brava Moldable Ring is pretty clear:
- They are more durable and less likely to “melt”.
- They are easier to handle and leave less residue.
- They are available in more sizes to fit the stoma better (currently 6 different options vs. 2).
- They come off the skin more cleanly.
These come in an attractive white and blue colored box that opens up by sliding the center part. I would have liked a traditional box that just opens on the top, but that’s just my preference.
Each Protective Ring comes in an individually sealed plastic packet, making them easy to travel with. There’s a little pull tab on one corner to open the packet. Inside, you will find the Protective Ring with plastic liners on each face (to protect it from sticking in the package). These come off easily.
Something that I really appreciate is the fact that Coloplast offers several sizes and thicknesses of Protective Rings to accommodate various stoma sizes and requirements.
Currently, the following sizes are available:
- 18mm / 2.5mm thick.
- 27mm / 2.5mm thick.
- 34mm / 2.5mm thick.
- 18mm / 4.2mm thick.
- 27mm / 4.2mm thick.
- 34mm / 4.2mm thick.
My stoma usually sits around the 30-32mm size, so I went with the 27mm ring, which can be stretched out. If you have a larger stoma, like one for a colostomy, then you have the option of going with a 34mm ring.
You can also go with rings that are either 2.5mm or 4.2mm depending on your needs.
I’m happy to report that Coloplast does not use animal ingredients in this product, which makes it suitable for vegans.
Using the Brava Protective Ring
The Brava Protective Ring works like most other barrier ring products and the instructions are the same:
- Remove the ring from the package by pulling on the blue tab.
- Remove the release liner from the face of the ring.
- Stretch it to the size/shape of your stoma.
- Either apply it directly to your skin, making sure that it’s snug around your stoma. Or, you can apply it around the hole on the back of your wafer (my preferred method).
- Proceed with putting on your appliance.
There are two release liners that need to be removed. You can apply the Protective Ring to the back of your wafer. Or you can apply around your stoma.
Of note, the instructions also say that “If you use a 2-piece ostomy appliance, it is possible to apply Protective Seal directly to the coupling side of the baseplate, to achieve a snug fit around the stoma.” I did try this as I can see it coming in handy if you’ve cut your wafer too large, but I didn’t find this to be particularly effective as a gap would be left as my stoma expands and contracts with peristalsis – stick to sticking this under your wafer (no pun intended).
Speaking of filling gaps, if you were to cut your wafer a little too big, putting one of these Protective Rings under your wafer will help to protect your skin and fill in the space (see photo below for an example).
There’s really nothing special about removing the ring – I find that it comes off together with my wafer if I’m using an adhesive remover spray (which I recommend doing). You may decide to follow up by cleaning the skin to remove any residue, but it’s not really necessary unless you have to shave the area.
My experience with removing these rings is far better than with other products, which often tend to come apart or leave a sticky mess. This is a big improvement over the Brave Moldable Rings.
My Experience
Having sampled many different barrier rings from various brands, I will say that these are some of the best when as far as durability and ease of removal are concerned.
When it comes to actually handling the Protective Ring as you’re applying it, they are a bit sticky but don’t leave as much residue as other barrier ring products I’ve tried. And while I’d usually be washing my hands after handling a barrier ring, I didn’t feel the need to with these.
In my tests, I’ve worn these rings between two and six days of continual wear, and they don’t “melt” like I would have expected. Melting is the most common complaint from people who use barrier rings, and some products turn to mushy goo after a few days of wear.
Most surprising, however, is when it came time to removing my appliance. Usually, I would expect a sticky mess when using a barrier ring, but these come off pretty cleanly and together with my wafer (especially when you use an adhesive remover).
I won’t say that it’s perfect, though. There’s still a slight bit of residue left on the skin, but it’s mostly just tackiness – not globs of product you have to scrape off!
But do they work?
Obviously, if you’re using a barrier ring it’s likely to solve an issue with either leaks or to help fill in gaps under your appliance.
That said, I would say that my success with this product is about 70%.
I was sometimes able to get six days of wear without any leaks and minimal erosion of the product, and at other times I’d get a leak after two days. This is frustrating, to say the least, especially if the goal is to prevent leaks.
This inconsistency is something I’ve noticed with other barrier rings, including Eakin Rings, so it’s not really the fault of this particular product.
One possible reason for this is because my output is generally thicker, and barrier rings work better with thin or liquid output. That said, without a barrier ring I’m able to easily get 4+ days of wear that’s consistent and (mostly) trouble-free.
But just because these don’t work for me on a regular basis, doesn’t mean that I can’t use them off and on when my skin needs some time to heal. In fact, these are perfect to use if I have some damaged skin around my stoma, and I outline how I heal my skin in THIS article.
Conclusion
At the time of this writing (March 2017), a box of Brava Protective Rings sell for CDN$50-60 depending on the size. These are now available in Canada and the UK (Sold as “Brava Protective Seals”), but will be available in the US soon!
Samples are available from Coloplast and I would recommend you try a sample before purchasing a box just to make sure they work for your skin. I would also recommend sampling these if you already use a barrier ring product but have had trouble with excessive “melting” or removing it.
Most private insurance companies should cover these.
Pros:
- Can help to prevent leaks around the stoma.
- Available in multiple sizes and thickness’.
- Doesn’t “melt” like the Brava Moldable Rings.
- Leaves very little residue on the skin.
- Individually sealed.
- No animal ingredients.
- Can be applied to wafer or directly to your skin.
- Conforms to any required shape.
- Can be torn into a smaller size.
Cons:
- Inconsistent results (for me).
- Not available everywhere.
- Expensive.
Recommended
If you’re using the Brava Moldable Rings and find that they break down too easily or are difficult to remove cleanly, then the Brava Protective Rings will be a step up.
If you’ve used barrier rings and weren’t happy with how they worked, I would at least suggest giving these a try to see if you have a better experience.
Info: For more information or to request samples, please visit http://www.coloplast.us/ or http://www.coloplast.ca/ (If in Canada).
Question: Have you used this product?
Can you use the protective seal on Hollister wafers?
Hi Brandi. Yes, you should have no trouble using the Coloplast barrier rings or protective seals with Hollister wafers. In fact, you should be able to use any brand’s barrier ring with any other brand of wafer. I’ve never heard of there being an incompatibility between those supplies.
Yes, I most wafers you’ll notice a center ring and an adhesive border surrounding is. This center ring is designed to absorb fluids so they aren’t on your skin. This does lead to degradation.
The part outside of this ring doesn’t serve the same purpose and usually has a stronger adhesive to keep the wafer in place.
I like that you tried with the barrier ring over the wafer. Some rings work better than others for this, but even that shouldn’t be necessary for longer wear time. I just did an appliance change (day 8) with just a plain wafer.
But my motto is often “whatever works" so keep experimenting to find what works best for you ?
Second application also went well. Eight days easy. Similar look to the wafer. Did my third try at this Sunday morning. I think next change I will try again with no ring. Just to verify that this is having any better effect. I may have just done a poor application with wafer only.
Skin is doing well after eight day stretch. Have used the skin barrier wipes before application. They seem to prevent a lot of the itch.
Of course all this is just me. Everyone has different issues with wear time adhesion etc.
Experiment.
I have just done my second application with a weird ring placement. Last Saturday I applied the wafer directly to the skin, but I had a Brava Protective ring applied on top of the wafer. Eight days later I have tried it again. I cut the wafer to 18mm diameter. Very snug to my stoma. Took very precise measurement. Trimmed the ring to fit into the wafer bag ring. PITA. But I now have 18mm rings, so less fiddling with trimming.
Comparing the wafer only to the wafer with ring on top, shows a very significant reduction in wafer deterioration above and below. After 8 days, I felt I could have gone even longer. With just the wafer also snug to the stoma I got 7 days, but just barely. Day 6 had some stinging.
Seems the ring may offer protection to the wafer and it’s adhesive. The Sensura Mio wafer seems to have a type of ring protection built into it. ( maybe others do too )There is a thicker layer of some material. Over time this material comes up and out around the hole. But underneath this material erodes quite a bit. Along with the adhesive that is on it. Looks spongy. Lots of holes/bubbles. With the ring on top, this material held up much better. Still swelled up. But did not get so eroded. Did not swell up and out of the hole much at all.
Just the first test results. But hopefully it will repeat with this application. I will try more of the same applications. Then I want to try skin barrier sheets. But trimming the sheets to just the area close to the stoma. I suspect that I can allow the built in ring type material to absorb and swell, but have the barrier sheet protect from the seepage getting to the skin.
Hope this isn’t wasting time and space here. But nobody is forced to read my yammering :)
@kedikat
I for one will be following your yammering’s with interest. the wafers do erode quickly swelling and bubbling with a liquid output, so if the barrier ring on top reduces the speed or erosion then your on to something there! I have learnt more on this forum thanks Eric and the members who live with a stoma everyday than from any expert who never have to sleep a night with a stoma!! We all know that experience.
One thing that seems to be true is that barrier rings, strips, pastes, etc. are not going to have the same adhesive strength as wafers. This is especially true when the bag is heavier or if there’s a lot of pulling of the wafer.
I would suggest using a support belt or garment to keep the weight off your wafer if you are using any of those extra products.
A bare wafer tends to offer the greatest holding power.
@veganostomy
I noticed that the area that does not stick well is also with no ring. It is that thicker area on the Sensura Mio wafer that seems to act as a ring by itself. I guess it absorbs the juices and maybe degrades the adhesive. It comes up and out around the stoma. The edges outside of that area stick solid seven days and more.